LOOP HANDLE 25CC
HONDA HHT25SLTC
- Handle Type
- Loop
- Starter
- Recoil starter
- Configuration (Head Type)
- Semi-matic Quiet LineTM feed nylon (tap-and-go)
- Weight
- 5.9 kg (13 lbs.)
Features
Perfect for jobs around the home because it's powerful and lightweight
Includes Semi-matic (tap-and-go) trimmer head, shoulder harness and protective goggles
Multi-strand drive cable that absorbs vibration and impacts
Electronic ignition for dependable starts
Low-tone muffler for quieter operation
25 cc Honda GX25 OHC Mini 4-stroke engine
Engine
remove
- Engine Type
- Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
- Honda Engine Model
- GX25
- Displacement
- 25 cc (1.53 CID)
- Bore & Stroke
- 35 X 26 mm (1.4 X 1 in.)
- Maximum Net Torque
- 1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
- Idle Speed
- 3,100 ± 200 RPM
- Max. No-Load RPM* (Requires Blade Barrier)
- 10,000 RPM
- Ignition System
- Transistorized flywheel magneto (electronic)
- Spark Plug
- CMR5H (NGK)
- Cooling System
- Forced air
- Starting System
- Recoil starter
- Stopping System
- Ignition primary circuit ground
- Carburetor
- Diaphragm type w/fuel pump
- Recommended Fuel
- Regular unleaded gasoline (87 Octane)
- Fuel Primer
- Anti-flood type
- Fuel Capacity
- 0.5 L (17.6 fl. Imp. oz.)
- Fuel Consumption (approximate)**
- 0.5 L/hr (0.11 Imp. gal./hr)
- Clutch Drive Type
- Centrifugal Twin Shoe-Clutch
- Clutch Size
- 54 mm (2.125 in.) Diameter
- Clutch Engagement
- 4;200 ± 200 RPM
- Air Cleaner
- Semi-dry type
- Lubrication System
- Oil mist
- Oil Capacity
- 80 cc (2.82 fl. Imp. oz.)
- Recommended Oil
- SAE 10W30 API service classification SJ or later
-
Product Dimensions
remove- Overall Length With Cutter Mounted
- 188.5 cm (74.2 in.)
- Overall Width
- 34.5 cm (13.6 in.)
- Overall Height
- 26.5 cm (10.4 in.)
- Dry Weight (Without Blade)
- 5.9 kg (13 lbs.)
-
Additional Information
remove- Handle Type
- Loop
- Throttle Control Type
- Two-motion trigger type
- Engine Stop Switch
- Slide type switch
- Cutting Head (Standard)
- Semi-matic line feed nylon (tap-and-go)
- Cutting Head (Optional)
- Manual, pro-tap, semi-pro
- Cutting Width
- 43.2 cm (17 in.)
- Line Type
- Quiet LineTM
- Cutting Line Diameter
- 2.41 mm (0.095 in.)
- Anti-Vibration System
- Standard
- Drive Shaft Type
- Flexible steel cable
- Final Drive Gear Case
- Helical cut bevel gears / Sealed ball bearings
- Gear Ratio
- 1.235 Input shaft: 1 (Output Shaft)
- Main Pipe Diameter
- 25.4 mm (1 in.)
- Main Pipe Thickness / Material
- 1.5 mm (0.06 in.) / Aluminum
- Trimmer Guard With Cutter
- Standard
- Steel Blade Guard
- Optional
- Shoulder Harness
- Standard
- Professional Double Loop Harness
- Optional†
- Safety Goggles (A.N.S.I Std.)
- Standard